Dark Light
,

ATEN 6 x 6 Dante Audio Interface with HDMI VE66DTH


ATEN VE66DTH is a Dante-enabled six−input/six−output Audio Interface with HDMI. Using Dante™ – the most popular audio networking solution created by Audinate, the VE66DTH is capable of delivering uncompressed, close-to-zero latency digital audio signals across your standard IP network. The VE66DTH transmits and receives up to 6-channel of audio inputs and outputs via a Dante network – the audio inputs can support not only the line input but also the dynamic and condenser microphones at the same time. Additionally, the device can also provide condenser microphones with 48V Phantom power supply. With its built-in PoE (Power over Ethernet), the VE66DTH can be powered by a compatible PSE device through Ethernet cable. Moreover, the VE66DTH provides flexible audio capability with audio de-embedding and embedding. It can de-embed HDMI stereo audio signals to the Dante networking system and embed Dante audio signals into the HDMI output.

  • Features Dante™ networked audio interface – a complete audio networking solution that distributes uncompressed, multi-channel audio transmission via standard Ethernet networks, with near-zero latency and perfect synchronization
  • Integrates up to 6-channel balanced mono audio Line/Mic input signals onto a Dante-enabled audio system and supports both dynamic and condenser microphones
  • Provides 48V Phantom power supply to condenser microphones
  • AES67 support
  • Easy to use and set up – User can use ”Dante Controller” for the simple setup
  • Delivers up to 6-channel balanced mono audio Line outputs from the Dante network to the audio system
  • Supports HDMI 2.0 input with HDCP 2.2 compliant – the HDMI input can de-embed HDMI stereo audio to the Dante network
  • Supports HDMI 2.0 local output – the VE66DTH can embed the Dante audio into HDMI output
  • Supports PoE – power can be supplied by a compatible PSE device through Ethernet cable
SKU: ATE_VE66DTH Categories: ,
Audio Inputs
Interfaces Line/Mic Input:
3 x 3.5 mm captive screw connector, 5 pole; Analog mono, balanced
Impedance: >6.8k ohms unbalanced; >13.6k ohms balanced
Maximum level: 0dBV (1Vrms)
Mic Pre-amp: +40 dB, balanced
Phantom Power: +48V,10mA

HDMI Input: HDMI Stereo Audio

Audio Outputs
Interfaces Line Output:
3 x 3.5 mm captive screw connector, 5 pole; Analog mono, balanced
Impedance: 50 ohms unbalanced, 100 ohms balanced
Maximum level: 0dBV (1Vrms)

HDMI Output: HDMI Stereo Audio

Audio
Format Uncompressed, 24-bit, selectable at 44.1, 48, 88.2, or 96 kHz
Latency: Deterministic, based on user selection: 1.0 ms (default)

Frequency response: 20Hz~20KHz, +/- 0.3dB
THD + Noise: < -65dB (0.1%) (1KHz,1Vrms @ 0dBV)
S/N: > 80dB (1KHz,1Vrms @ 0dBV)
Cross Talk: < -50dB (15KHz,1Vrms @ 0dBV)

Input 8 audio channels ( 6 x Analog Input & 1 x HDMI Stereo Audio )
Output 8 audio channels ( 6 x Analog output & 1 x HDMI Stereo Audio Embedded from HDMI/Dante )
Video Input
Interfaces 1 x HDMI Type A female (Black)
Impedance 100 Ω
Max. Distance 1.8m
Video Output
Interfaces 1 x HDMI Type A female (Black)
Impedance 100 Ω
Video
Max. Resolution Up to 4096 x 2160 / 3840 x 2160 @ 60Hz (4:4:4)
Compliance HDMI 2.0 (3D, Deep Color, 4K); 4K HDR
HDCP 2.2 Compatible;
Control
Ethernet 1 x RJ-45 Female (Silver) through Dante
Switches
Video Output Port Selection 1 x Slide Switch – HDMI Output Audio Selection (From HDMI in / Dante / Off)
Selection 6 x Slide Switch – Mic Input Pre-Amp ON/OFF
Phantom power 6 x Slide Switch – Mic Input Phantom Power ON/OFF
Reset 1 x push button
Connectors
Power 1 x DC Jack (Black) or
1 x RJ-45 Female (Silver) POE
Unit To Unit 1 x RJ-45 Female through Dante
Power Consumption DC5V:8.9W:41BTU
POE:11.1W:52BTU
Environmental
Operating Temperature 0-40°C
Storage Temperature -20 – 60°C
Humidity 0 – 80% RH, Non-Condensing
Physical Properties
Housing Metal
Weight 0.85 kg ( 1.87 lb )
Dimensions (L x W x H) 17.42 x 15.49 x 2.88 cm
(6.86 x 6.1 x 1.13 in.)