Dark Light
,

ATEN 4-Port HDMI HDBaseT Splitter (HDBaseT Class A) VS1814T

Add to wishlist
Compare

The VS1814T 4-Port HDMI HDBaseT Splitter provides a fast and efficient way of switching high definition video from one input source to 4 displays. Incorporating suggested HDBaseT receivers*, the VS1814T can be a complete solution ideal for any installation that requires HDMI content to be delivered to multiple destinations, located up to 100m away from the source.

* Suggested Compatible Receiver Units: VE812R HDMI Over Single Cat 5 Receiver

  • One HDMI input to 4 HDMI outputs via a Cat 6/6a cable
  • Offers local HDMI output
  • Extends displays up to 100 m
  • Implements HDBaseT extension technology using only one Cat 5 cable to connect the transmitter and receiver
  • Anti-jamming – resists signal interference during high-quality video transmissions using HDBaseT technology
  • HDMI (3D, Deep color, 4kx2k); HDCP 1.4 Compatible
  • Supports Dolby True HD and DTS HD Master Audio
  • Consumer Electronics Control (CEC) support
  • Built-in bi-directional RS-232 serial remote port for high-end system control
  • Supports resolutions of up to Ultra HD 4kx2k and 1080p Full HD
  • Supports up to 340MHz bandwidth for high performance video
  • EDID mode selection
  • Rack-mountable

    * Note: The VS1814T is compatible with the VE812R HDMIover Single Cat 5 Receiver.

SKU: ATE_VS1814T Categories: ,
Video Input
Interfaces 1 x HDMI Type A Female (Black)
Impedance 100 Ω
Max. Distance 1.8 m
Video Output
Interfaces 1 x HDMI Type A Female (Black) – Local Output
4 x RJ-45 Female
Impedance 100 Ω
Video
Max. Data Rate 10.2 Gbps (3.4 Gbps Per Lane)
Max. Pixel Clock 340 MHz
Compliance HDMI (3D, Deep Color, 4K)
HDCP Compatible
Consumer Electronics Control (CEC)
HDBaseT Compatible
Max. Resolution Up to 4096 x 2160 / 3840 x 2160 @ 60Hz (4:2:0);
4096 x 2160 / 3840 x 2160 @ 30Hz (4:4:4)
(Depends on connected receiver)
Max. Distance Up to 100 m (Depends on connected receiver)
Audio
Input 1 x HDMI Type A Female (Black)
Output 1 x HDMI Type A Female (Black)
Control
RS-232 Connector: 1 x DB-9 Female (Black)
Serial Control Pin Configurations: Pin2 = Tx, Pin 3=Rx, Pin 5= Gnd
Baud Rate and Protocol:
Baud Rate: 19200, Data Bits: 8, Stop Bits:1, Parity: No, Flow Control: No
EDID Settings EDID Mode: Default / Port 1 / Auto / Learn
Connectors
Power 1 x 3-Prong AC Socket (Black)
Power Consumption AC110V:18.2W:85BTU
AC220V:18.2W:85BTU
Environmental
Operating Temperature 0-50°C
Storage Temperature -20 – 60°C
Humidity 0 – 80% RH, Non-Condensing
Physical Properties
Housing Metal
Weight 3.47 kg ( 7.64 lb )
Dimensions (L x W x H) 43.24 x 26.11 x 4.40 cm
(17.02 x 10.28 x 1.73 in.)
Carton Lot 1 pcs

Related products