Dark Light

ATEN ATEN Control System – 12-button Control Pad (EU, 2 Gang) VK0200

The VK0200 is a fully-customizable 12-button Control Pad that integrates a controller with a keypad as an all-in-one solution. Aimed for small/medium meeting room or classroom control, the VK0200 offers a ready-to-use solution that easily connects the devices, configures via the intuitive VK6000 Configurator Software, and flexibly customizes keypad button functions and layout to fulfill most applications.

  • VK0200 Control Pad
    • Supports various interface connections:
      •  2 x RS-232 ports
      •  2 x Relay channels
      •  1 x Dgital input channel
      •  1 x Ethernet port
    • Designed to mount in 2-gang EU-type and MK-type junction boxes
    • Fully customizable with 125 layout combinations of 6 to 12 buttons
    • Available in black or white color
    • Supports native KNX IP for building management systems
    • Telnet, TCP, UDP, HTTP, HTTPS, ONVIF, and PJLink compliant
    • Supports project file backup1
    • Web GUI for easy system configuration
    • Supports SSH communication for data monitoring2
    • LED indication of connection and hardware status
    • Dual-color LEDs for clear indication in dark environments
    • Redundant power supplies – Power over Ethernet and DC 5V (optional)
    • Customized button engraving service
  • VK6000 Configurator Software
    • Simple profile setup with easy configuration steps via intuitive GUI
    • Customizable GUI to be used on mobile devices and PC3
    • Supports ControlAssist that allows PC control4
    • Built-in Database Generator for device driver setup and overall device management
    • Built-in ATEN Library comprising 10,000+ device drivers and complete ATEN VanCryst product drivers
    • Two-way communication enables user-defined event monitoring to automatically trigger the next actions
    • Test tool to verify commands in action before uploading the profile to the VK0200 Control Pad

      1. Each ATEN Control Box is capable of backing up one project file.
      2. The SSH protocol can be used for monitoring the receiving/transmission data of the Control Pad.
      3. Additional license is required for mobile control.
      4. For details on the supported PC control actions, refer to the ATEN Control System User Manual.

SKU: ATE_VK0200 Categories: ,
Keypad Layout 6~12 buttons customizable in 125 keypad layouts
Serial • 2 x Bi-directional RS-232 Port
(2 x 3-Pole Terminal Block Connector);
 – Baud Rate: 300 to 115200 (default: 9600);
 – Data Bit: 8 (default) or 7;
 – Stop Bit: 1 (default) or 2;
 – Parity: None (default), even or odd
Relay • 2 x Relay Channel (2 x 2-Pole Terminal Block Connector);
• Normally open, isolated Relays;
• Contact Rating: Max 24 VDC, 1A
I/O • 1 x Digital Input Channel
(1 x 2-Pole Terminal Block Connector);
 – VDC Mode
Input Voltage Range: 0 to 5 VDC;
Programmable Range: 1 to 5 VDC;
 – Dry Contact Mode
Pull-up 2k ohms to + 5 VDC
Ethernet • 1 x RJ-45 Female, 10/100Base-T
• Supported Protocol: ARP, ICMP, TCP/IP, DHCP, HTTPS, SSH
• DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds:
Subnet Mask:
Controller ID 1 x 16-segment Switch
Reset Button 1 x Semi-recessed Pushbutton
Power Consumption DC5V:1.15W:5BTU
Operating Temperature 0 – 50°C
Storage Temperature –20 – 60°C
Humidity 0 – 80% RH, Non-Condensing
Physical Properties
Housing Plastic
Weight 0.19 kg ( 0.42 lb )
Dimensions (L x W x H) 8.32 x 14.76 x 4.80 cm
(3.28 x 5.81 x 1.89 in.)
Max. No. Allowed 10 licenses
Note Each time a mobile device connects to an ATEN Control Pad for remote control, one license on the Control Pad will be occupied. To purchase and add additional licenses to your ATEN Control Pad, contact your local sales representative for more information.